|
|
Build Your Online Product Catalogs?
Under the concept of green, environmental protection, and sustainable development, the tire-to-oil pyrolysis process uses high temperature pyrolysis to turn waste tires into useful alternatives. It is a chemical process that cracks macromolecular compounds into small molecular tire oils. The complete tire recovery process is also referred to as the waste tyre pyrolysis plant(http://www.recyclingpyrolysisplant.com/FAQ/pyrolysis_plant/how_much_does_tyre_pyrolysis_plant617.html) process, through which fuel, carbon black, steel wires and combustible gases can be obtained.
This process may seem simple. If this process is broken down, you will find that the DoingGroup tire-to-oil pyrolysis plant(http://www.china-doing.com/faqshow.asp?id=301&mnid=150&classname=FAQ&uppage=/faq.asp) is not simple:
1. Collect waste tires. If possible, you can use the tire spinning machine to extract the steel wire from the waste tires. Of course, you can also put the prepared waste tire directly into the reactor.
2. The prepared waste tires, or waste tires withdrawn from the steel wire, are sent to the reaction tank through an automatic pushing device. Soldiers heated the reactor. When the temperature reaches a certain height, oil and gas will be cracked.
3. Under the effect of high and low pressure in the equipment, the cracked oil and gas enters the condensing system and is liquefied into heavy oil and flows into the oil tank. The DoingGroup adopts a three-stage condensing system to ensure that the oil and gas are cooled sufficiently to increase the oil yield.
4. Deodorize and deodorize the heavy oil in the tank and get the final fuel. In order to avoid environmental pollution caused by the discharge of poisonous and odorous gases, DoingGroup launched a desulfurization and deodorization tower system, which completely solved the problem of odor produced after the equipment was operated.
5. The carbon black produced during the combustion process will pass through the underground sealed slag discharge channel and be discharged ou |
| Company: |
DoingGroup
|
| Contact: |
Ms. julia ge |
| Address: |
No.138 Yingxie Road,Jinshui District |
| Postcode: |
450000 |
| Tel: |
371-56771821 |
| Fax: |
371-86222525 |
| E-mail: |
|
|
|
|
Home
